What are the functions and characteristics of automatic laminating machine?
Functions and characteristics of automatic laminating machine:
1, automatic paper feeder: Feida paper feeder precision design, so that thick and thin paper can be smoothly sent out, the use of no section transmission device, with automatic edge control, to adapt to different paper feeding. Precision of the limelight, operation and operation is very convenient to adjust the limelight in the relative position of the paper pile. Special NON-STOP paper refill device, that is, equipped with auxiliary table, can feed paper and fill paper at the same time, to ensure continuous production.
2. Powder removal device (optional combination) : it adopts the two-stage powder removal structure, the paper passes through the conveyor belt, the brush roller and the exhaust brush sweep the powder, so that the dust on the surface is sucked away by the suction fan, and then after the electric pressure roller rolls, the dust sprayed on the paper surface in the printing is effectively removed; In addition, the close arrangement design of the conveyor belt combined with efficient air suction makes the paper will not be removed or misplaced, so that the paper can be accurately delivered to the main machine pressing part.
3. The hard chrome composite roller of the host machine has built-in electric heating system and automatic temperature control device, so that the temperature distribution is uniform. The design of large composite roller increases the pressing surface: the diameter of the electric heating roller is 420mm, and the inner wall of the roller core is round, so that the roller is not biased and the heating surface is even. The diameter of the clamping roller is 360 mm, which ensures smooth and stable operation of OPP film. The hand-pressed hydraulic cylinder controls the compound pressure, which can balance the pressure of the upper and lower rollers. High precision hard chrome plated mirror heating roller combined with high performance pressing rubber roller, perfect thermal laminating process.
4. The coating head is controlled by imported frequency conversion governor. The glue roller is processed by high precision grinding and the inner wall is specially rebalanced to keep the coating quantity stable more effectively. At the same time, two sets of pump and stainless steel oil tank are standard, suitable for the use of water-based and oil-based glue. Using DC motor pressing film coating device, stable, fast, simple operation.
5, the film release reel, using magnetic powder brake, maintain stable tension, the unique pneumatic film tension device to ensure the film pressure, film tension, effectively prevent the failure of film rolling.
6, automatic cutting device: the cutting length can be set freely according to the paper size, and the speed can be controlled freely. Unit linkage operation system, according to the speed of the main engine, automatic increase and decrease, simple operation, save labor cost, reduce the labor intensity of the operator. Knife spiral design, rotary knife block 4 groups of blades, fine-tuning control, easy to operate; When adjusting, interact with the pressure drum. With the reverse paper roller, can cut thin paper, 128 grams of paper can be online automatic cutting; Equipped with automatic winding device, for poor quality and hardness of the paper, can be rolled up and down.
7, the drying system adopts a special horizontal drying box design and manual constant temperature control system (easy to operate, fast heating speed, effectively save the auxiliary time from 30° to 90° only 15 minutes), this design can make the OPP film stable march dry, will not lead to film offset or shrinkage. Suitable FOR WATER-BASED GLUE DRYING system, high heat, wide distribution, completely make the heat evenly distributed on the OPP film, promote glue fast drying, fast reaction speed.
8, the advanced circuit adopts FATEK original PLC programming control, the machine electromechanical integration control, the touch screen can automatically adjust the edge size, without manual operation, reduce the error of paper edge. The human-machine interface displays the speed, the mechanical working state, the fault hint, achieves the humanized operation; The motor adopts frequency conversion control, which is stable, energy saving, safe and reliable.
9, automatic paper receiving machine (optional combination) : pneumatic bilateral flat paper device, with paper counter; Conveying table attached with vacuum suction air belt; Paper tissue paper guide device; Chain hanging board carrying paper table, photoelectric induction automatic descent; The paper receiving table is equipped with an auxiliary loading table, which can be continuously collected by machine. (If there is no automatic paper receiver, add a counter before receiving cardboard, which can measure and alarm.)
The above is an overview of the functions and characteristics of automatic lamination machine of Ruian Jialit printing and packaging machinery Co., LTD. The company's products based on the domestic post-press processing machinery market at the same time, Continuous progress and has developed a new generation of automatic high-speed OPP laminating machine and automatic high-speed UV glazing oil dual-use machine, such as a number of production process superior automation of high degree of new models and products are exported to foreign countries and have been approved by foreign investors. Enterprises throughout the country to establish a strong sales service network system, dedicated to the majority of new and old customers to provide the most superior products and efficient service. Phone: 13967713881
