Fumo machine in how to reduce the dosage of the film coated | Carrie
Ruian Jialite Printing and Packaging Machinery Co., Ltd. specializes in the production of high precision laminating machine, non adhesive laminating machine and other products.
When the laminator laminates the film dose level and working relationship, it is recommended that:
When building products must be straight. Flounces "and" tight edge "phenomenon is not straight paper processing. Flounces of paper baking processing, hanging dry processing tight edge paper.
Must wait before blot paint, otherwise will cause blistering or hair phenomenon.
As little as possible. Print powder spray, otherwise it will cause a pile of powder in the empty blister. Should be coated with dust disposal before printing, can go to the pink hanging dry print in reduced manual wiping.
It should also be noted that the direction of the paper thread, especially the thick paper, by grinding roller stretch to reduce the paper curling phenomenon.
Yes: The temperature is controlled in 40 ~ 60℃. The temperature is too high, so that the paper and film deformation, resulting in product curling, but not too low, otherwise it will cause enough viscosity. The temperature of coated paper should be slightly lower than that of uncoated paper.
