Ruian Jialite Printing and Packaging Machinery Co., Ltd. specializes in the production of high precision laminating machine, non adhesive laminating machine and other products.

1. When the machine is running, prevent fingers from entering the two rollers to avoid tying hands. The temperature of the pressing roller of the machine is high, do not touch the roller by hand to avoid scalding.

2, glue and thinner, cleaning machine are flammable, pay attention to the fire around the machine.

3 original sensor, the temperature controller to electric coupling to test the temperature, due to installation position and the temperature and the influence of the external wind flow around is larger, the precision of temperature measurement has bigger error of the thermometer on the guidance for the absolute temperature, the temperature of the user should be based on the practice of processing experience and reference temperature thermometer guideline values and choices.

4, the machine used by the new device should be enhanced to the machine smooth, pay attention to not fast use of the machine in the machine transmission running-in stage.

5. Strictly prevent any tools, devices and sundries from being placed on the machine. The air gap of the rubber roller and the rubber roller is very small. Once any hard material is pressed into the rubber roller appearance, the pressure pits or cracks are left on the rubber. Light needs a long time of natural elastic recovery, heavy indirectly make cots scrap.

6. When repairing and inspecting the machine, the main power switch of the machine should be closed. The electrical system of the machine should maintain good insulation to avoid being affected by moisture.

7. When stopping the machine, the hydraulic system will be unloaded, the pressing roller and the rubber roller will leave, and the scraper and the prepressing roller will be released, so as to avoid the temporary compression deformation and damage of the two rollers.