Ruian Jialite Printing and Packaging Machinery Co., Ltd. specializes in the production of high precision laminating machine, non adhesive laminating machine and other products.

Pre-coated laminating machine parts, as follows: 1. Composite material parts. Including the group of composite roller and pressing roller sets. The composite roller is provided with a heating pressure roller and a silica gel composed of pressure roller. The thermal pressure roller is a hollow roller, equipped with internal heating device, hard chrome-plated surface forging, polishing, fine grinding and processing; Hot press roll temperature sensor tracking sampling, the computer at any time to correct; In the eccentric CAM mechanism of composite pressure adjustment, the pressure can be adjusted. The calendered roll assembly is essentially the same composite roll assembly, that is, the roll composition is pressurized with silica gel from the pressure of the chromium roll, but without heating. 2. Computer control system. The computer control system uses microprocessor, laminating machine hardware configuration of the motherboard, digital key board, optical isolator board, power board, stepper motor power drive board. Print the input as shown in Figure 3. Automatic transmission mechanism can ensure that the printing does not occur in the transmission of overlapping and equidistance input of the composite part, generally using accurate delivery, high precision inflation or friction control to achieve, and when the composite format is small font, can also meet the above requirements. As shown in Figure 4, the transmission system. The CLUTCH high power motor DRIVE IS COMPUTER-controlled by three chain-driven gears after deceleration, driving the motion of the paper feed mechanism and the composite part and the calendered mechanism of the silicon pressure roller rotation. Maintain the appropriate working pressure, pressure roller set in the stepless adjustment pressure.