How to solve the problem when the glazing machine appears
Glazing machine in the use of the process will always appear some problems, but many people do not know why this reason, and how to troubleshoot the method is not very clear. Today Xiaobian to share with you a few reasons and solutions.
1) Small granular impurities appear on the surface of the glazing print
Cause of failure: the coating is mixed with impurities.
Solution: glazing paint should be filtered before use. Before the glazing machine paint bucket and cots should be cleaned to avoid dirt mixed.
2) Poor gloss of the glazing film layer
Cause of failure :a. Low temperature in drying and pressing; B. The coating quality is poor, and its gloss is low after film formation; C. The coating concentration is small and the coating is too thin.
Solution :a. Adjust the drying temperature of glazing coating and increase the pressure gloss temperature; B. Change the coating, or increase the concentration of coating, increase the amount of coating; C. Secondary coating can be used.
Source: Glazing machine, automatic glazing machine, automatic laminating machine - Ruian Jialit Printing and Packaging Machinery Co., LTD
PrevHow does the glazing machine polish the printed matter
NextDoes glazing machine appear when paper coating film what method should fold have to solve
